Huawei Quidway S6700 series Configuration Manual page 150

Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
0/0/2 secondary-port xgigabitethernet 0/0/1 level 0
[UPED-rrpp-domain-region2] ring 1 enable
[UPED-rrpp-domain-region2] quit
# Configure UPE D as a transit node of ring 1 in domain 3 and specify primary and secondary
ports on UPE D.
[UPED] rrpp domain 3
[UPED-rrpp-domain-region3] ring 1 node-mode transit primary-port xgigabitethernet
0/0/2 secondary-port xgigabitethernet 0/0/4 level 0
[UPED-rrpp-domain-region3] ring 1 enable
[UPED-rrpp-domain-region3] quit
l Configure UPE E.
# Configure UPE E as a transit node of ring 1 in domain 3 and specify primary and secondary
ports on UPE E.
[UPEE] rrpp domain 3
[UPEE-rrpp-domain-region3] ring 1 node-mode transit primary-port xgigabitethernet
0/0/1 secondary-port xgigabitethernet 0/0/2 level 0
[UPEE-rrpp-domain-region3] ring 1 enable
[UPEE-rrpp-domain-region3] quit
l Configure UPE F.
# Configure UPE F as the master node of ring 1 in domain 3. Configure XGE 0/0/1 as the primary
port and XGE 0/0/2 as the secondary port.
[UPEF] rrpp domain 3
[UPEF-rrpp-domain-region3] ring 1 node-mode master primary-port xgigabitethernet
0/0/1 secondary-port xgigabitethernet 0/0/2 level 0
[UPEF-rrpp-domain-region3] ring 1 enable
[UPEF-rrpp-domain-region3] quit
l Configure UPE G.
# Configure UPE G as a transit node of ring 1 in domain 3 and specify primary and secondary
ports on UPE G.
[UPEG] rrpp domain 3
[UPEG-rrpp-domain-region3] ring 1 node-mode transit primary-portxgigabitethernet
0/0/1 secondary-port xgigabitethernet 0/0/2 level 0
[UPEG-rrpp-domain-region3] ring 1 enable
[UPEG-rrpp-domain-region3] quit
Step 5 Enable the RRPP protocol.
After configuring an RRPP ring, you need to enable RRPP on each node on the ring to activate
the RRPP ring. The configuration procedure is as follows:
l Configure UPE A.
# Enable the RRPP protocol.
[UPEA] rrpp enable
l # Configure UPE B.
# Enable the RRPP protocol.
[UPEB] rrpp enable
l Configure UPE C.
# Enable the RRPP protocol.
[UPEC] rrpp enable
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
140