Huawei Quidway S6700 series Configuration Manual page 295

Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
After completing the configuration, run the display loopback swap-mac information
command to verify the configuration. If the configuration is correct, send Ethernet frames from
the tester to test network performance.
[SwitchB] display loopback swap-mac information
Loopback type
Loopback state
Loopback test time(s)
Loopback interface
Loopback output interface : XGigabitEthernet0/0/1
Loopback source MAC
Loopback destination MAC
Loopback vlan
Loopback inner vlan
Loopback packets
----End
Configuration Files
l
Issue 01 (2011-07-15)
Configuration file of Switch B
#
sysname SwitchB
#
vlan batch 100
#
interface XGigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 100
loopback remote swap-mac source-mac 0018-2000-0085 dest-mac 0018-2000-0070
vlan
100 timeout 80
#
return
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: remote
: running
: 80
: XGigabitEthernet0/0/1
: 0018-2000-0085
: 0018-2000-0070
: 100
: 0
: 0
7 MAC Swap Loopback Configuration
285