Configuring Rrpp Multi-Instance - Huawei Quidway S6700 series Configuration Manual

Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
RRPP Protocol Status: Disable
RRPP Working Mode: HW
RRPP Linkup Delay Timer: 1 sec (0 sec default).
Number of RRPP Domains: 1
Domain Index
Control VLAN
Protected VLAN : Reference Instance 10
Hello Timer
Ring
ID
-------------------------------------------------------------------------------
1
Run the display rrpp verbose command, and you can view detailed information such as the
control VLAN, protected VLAN, timers, node mode, and port status. The following is an
example:
<Quidway> display rrpp verbose domain 1 ring 1
Domain Index
Control VLAN
Protected VLAN : Reference Instance 30
Hello Timer
RRPP Ring
Ring Level
Node Mode
Ring State
Is Enabled
Primary port
Secondary port : XGigabitEthernet0/0/2
Run the display rrpp statistics command, and you can view the statistics of sent and received
packets. The following is an example:
<Quidway> display rrpp statistics domain 1 ring 1
RRPP Ring
Ring Level
Node Mode
Is Active
Primary port
Packet
Direct
-------------------------------------------------------------------------------
Send
Rcv
Secondary port: XGigabitEthernet0/0/2
Packet
Direct
-------------------------------------------------------------------------------
Send
Rcv

3.4 Configuring RRPP Multi-Instance

RRPP multi-instance is based on domains. Multiple RRPP domains can be configured on a
physical ring. In a domain, all ports, nodes, and topologies must comply with basic RRPP
principles. Therefore, a physical ring has multiple master nodes. Each master node independently
detects the completeness of the physical ring and blocks or unblocks its own secondary ports
accordingly.
Issue 01 (2011-07-15)
: 1
: major 30
: 1 sec(default is 1 sec)
Ring Node Primary/Common
Level Mode Port
0 M XGigabitEthernet0/0/1
: 1
: major 400
: 1 sec(default is 1 sec)
: 1
: 0
: Master
: Complete
: Enable
: XGigabitEthernet0/0/1
: 1
: 0
: Master
: Yes
: XGigabitEthernet0/0/1
LINK
HEALTH DOWN
2934 0
0 1
LINK
HEALTH DOWN
0 0 1
2928 1 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
sub 31
Fail Timer : 6 sec(default is 6 sec)
sub 401
Fail Timer : 6 sec(default is 6 sec)
Is Active : Yes
Port status: UP
Port status: BLOCKED
COMMON COMPLETE EDGE
FDB FDB HELLO
1 1 0
0 0 0
COMMON COMPLETE EDGE
FDB FDB HELLO
0 0
0 0
3 RRPP Configuration
Secondary/Edge
Port
XGigabitEthernet0/0/2
MAJOR Packet
FAULT Total
0 2936
0 1
MAJOR Packet
FAULT Total
0 1
0 2929
Is
Enabled
No
61