Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
4.3 Configuring Basic EFM OAM
By configuring basic EFM OAM functions, you can detect connectivity of the direct link between
devices.
4.3.1 Establishing the Configuration Task
Before configuring basic EFM OAM functions, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.
Applicable Environment
As shown in
between two directly connected devices.
Figure 4-1 Diagram of configuring EFM OAM
interface 1
(Active mode)
Pre-configuration Tasks
None.
Data Preparation
To configure EFM OAM, you need the following data.
No.
1
4.3.2 Enabling EFM OAM Globally
You must enable EFM OAM globally before configuring EFM OAM functions.
Context
Do as follows on the devices at both ends of the link:
Issue 01 (2011-07-15)
Figure
4-1, you can perform the configuration task to detect the connectivity
EFM OAM
interface 2
(Passive mode)
Data
(Optional) Maximum size of an EFM OAMPDU
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Ethernet OAM Configuration-EFM
152