Checking The Configuration - Huawei Quidway S6700 series Configuration Manual

Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
Step 2 Run:
vrrp version v3
The VRRP version of the current device is set to VRRPv3.
Step 3 (Optional) Run:
vrrp version-3 send-packet-mode { v2-only | v3-only | v2v3-both }
The mode for sending Advertisement packets in VRRPv3 is set.
The default VRRP version is v2. If the VRRP version is switched to v3, the default mode for
sending advertisement packets is v3-only.
----End

6.9.3 Checking the Configuration

You can view VRRP version information to check whether the configuration is successful.
Prerequisite
The configurations of VRRP version upgrade are complete.
Procedure
l
----End
Example
After the configuration, run the display vrrp protocol-information command, and you can
view that the VRRP protocol version is v3 and the mode for sending Advertisement packets is
send v3 only.
<Quidway> display vrrp protocol-information
VRRP protocol information is shown as below:
6.10 Maintaining VRRP
This section describes how to maintain VRRP. Detailed operations include deleting VRRP
statistics, and monitoring the VRRP operation status.
6.10.1 Debugging VRRP
After debugging, you need to disable the debugging function in time.
Issue 01 (2011-07-15)
Run the display vrrp protocol-information command to view VRRP version information.
VRRP protocol version : v3
Send advertisement packet mode : send v3 only
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 VRRP and VRRP6 Configuration
247