Huawei Quidway S6700 series Configuration Manual page 52

Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
Figure 2-6 Networking of Smart Link application
Monitor Link group
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Issue 01 (2011-07-15)
Smart Link group
XGE0/0/1
SwitchA
Smart Link group
XGE0/0/1
User1
Configure Smart Link groups on Switch A and Switch C, and add uplink interfaces to the
groups.
Configure Monitor Link groups on Switch A and Switch B.
Enable Switch A and Switch C to send Flush packets.
Enable Switch A and Switch C to receive Flush packets.
Numbers of interfaces on Switch A, Switch B, and Switch C
IDs of the Smart Link groups
Control VLAN ID and password contained in Flush packets
IDs of the Monitor Link groups and the numbers of the downlinks
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Smart Link and Monitor Link Configuration
IP/MPLS
core
network
XGE0/0/1
XGE0/0/2
XGE0/0/3
XGE0/0/3
XGE0/0/2
SwitchC
User2
Monitor Link group
SwitchB
Active link
Inactive link
42