Huawei Quidway S6700 series Configuration Manual page 124

Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
l Configure PE-AGG.
l Verify the configuration.
Step 2 Configure RRPP interfaces.
l Configure CE1.
Issue 01 (2011-07-15)
# Create data VLANs 100 to 300 on UPE D.
<Quidway> system-view
[Quidway] sysname UPED
[UPED] vlan batch 100 to 300
# Create instance 1 and map it to control VLANs VLAN 5 and VLAN 6 and data VLANs
100 to 200 in domain 1.
[UPED] stp region-configuration
[UPED-mst-region] instance 1 vlan 5 6 100 to 200
# Create instance 2 and map it to control VLANs VLAN 10 and VLAN 11 and data VLANs
201 to 300 in domain 2.
[UPED-mst-region] instance 2 vlan 10 11 201 to 300
# Activate the configuration.
[UPED-mst-region] active region-configuration
[UPED-mst-region] quit
# Create data VLANs 100 to 300 on PE-AGG.
<Quidway> system-view
[Quidway] sysname PE-AGG
[PE-AGG] vlan batch 100 to 300
# Create instance 1 and map it to control VLANs VLAN 5 and VLAN 6 and data VLANs
100 to 200 in domain 1.
[PE-AGG] stp region-configuration
[PE-AGG-mst-region] instance 1 vlan 5 6 100 to 200
# Create instance 2 and map it to control VLANs VLAN 10 and VLAN 11 and data VLANs
201 to 300 in domain 2.
[PE-AGG-mst-region] instance 2 vlan 10 11 201 to 300
# Activate the configuration.
[PE-AGG-mst-region] active region-configuration
[PE-AGG-mst-region] quit
View the mapping between instances and VLANs. The displayed information on UPE A is
as follows:
[UPEA] display stp region-configuration
Oper configuration
Format selector
Region name
Revision level
Instance Vlans Mapped
0 1 to 4, 7 to 9, 12 to 99, 301 to 4094
1 5 to 6, 100 to 200
2 10 to 11, 201 to 300
# Disable STP on the interfaces that need to be added to the RRPP ring on CE1. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[CE1] interface xgigabitethernet 0/0/1
[CE1-XGigabitEthernet0/0/1] port link-type trunk
[CE1-XGigabitEthernet0/0/1] port trunk allow-pass vlan 100 to 300
[CE1-XGigabitEthernet0/0/1] stp disable
[CE1-XGigabitEthernet0/0/1] quit
[CE1] interface xgigabitethernet 0/0/2
[CE1-XGigabitEthernet0/0/2] port link-type trunk
[CE1-XGigabitEthernet0/0/2] port trunk allow-pass vlan 100 to 300
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
:0
:00e0cd568d00
:0
3 RRPP Configuration
114