Pocket Calculator; A.12 Pocket Calculator - Siemens SINUMERIK 808D ADVANCED Programming And Operating Manual

A.12

Pocket calculator

The calculator function can be activated from any other operating area using this key on the PPU (except in
"MDA" mode).
For calculating, the four basic arithmetic operations are available, as well as the functions "sine", "cosine", "squaring" and
"square root". A bracket function is provided to calculate nested terms. The bracket depth is unlimited.
If the input field is already occupied by a value, the function will accept this value into the input line of the pocket calculator.
Pressing this softkey empties the input line of the calculator.
After inputting a desired arithmetic statement in the input line of the calculator, pressing this key
starts the calculation. The result is displayed in the pocket calculator.
Selecting this softkey enters the result in the input field at the current cursor position and closes the
pocket calculator automatically.
Pressing this softkey aborts the calculation result (if any) and exits the pocket calculator.
Characters that may be entered
+, -, *, / Basic arithmetic operations
S Sine function
The X value (in degrees) in front of the input cursor is replaced by the sin(X) value.
O Cosine function
The X value (in degrees) in front of the input cursor is replaced by the cos(X) value.
Q Square function
The X value in front of the input cursor is replaced by the X
212
value.
2
Programming and Operating Manual (Turning)
6FC5398-5DP10-0BA2, 06/2015