A.10
Operation wizard
The operation wizard provides step-by-step guides on basic commissioning and operation procedures.
Operating sequence
210
1.
Press this key on the PPU to call the operation wizard.
2.
Use the cursor keys to select a step of the machining operation.
3.
Press this softkey to start the onboard assistant.
4.
Press this softkey to enter the next page.
5.
Press this softkey to enter the previous page.
6.
Press either key to return to the main screen of the operation wizard.
7.
Press one of the following five operating area keys to exit the main screen of the operation
wizard.
Programming and Operating Manual (Turning)
6FC5398-5DP10-0BA2, 06/2015