Appendix
A.1
Pocket calculator
The calculator function can be activated from any other operating area using this key on the
PPU (except in "MDA" mode).
For calculating, the four basic arithmetic operations are available, as well as the functions
"sine", "cosine", "squaring" and "square root". A bracket function is provided to calculate
nested terms. The bracket depth is unlimited.
If the input field is already occupied by a value, the function will accept this value into the
input line of the pocket calculator.
Pressing the following key starts the calculation. The result is displayed in the pocket
calculator.
Selecting the following softkey enters the result in the input field at the current cursor position
of the part program editor and closes the pocket calculator automatically.
Milling
Part 1: Operation
Programming and Operating Manual, 12/2012, 6FC5398-4DP10-0BA0
A
103