Siemens SINUMERIK 808D ADVANCED Programming And Operating Manual page 9

Keys with icons
The icon on the key is a hint that you can press both <CTRL> and this key as shortcuts for capturing
screens.
The icon on the key is a hint that you can press both <CTRL> and this key as shortcuts for saving
start-up archives and action logs to a USB stick.
The icon on the key is a hint that you can press both <CTRL> and this key as shortcuts for displaying
pre-defined slides on the screen or both <ALT> and this key as shortcuts for saving action logs to a
USB stick.
The icon on the key is a hint that you can press this key to call the calculator function.
The icon on the key is a hint that this key can be used together with another key to function as a key
combination.
Further information
To enter the upper character on an alphabetic/numeric/operating area key, keep this key pressed.
•
•
To open the system data management operating area, press the following key combination:
Enables user-defined extension applications, for example, generation of user dialogs with the
EasyXLanguage function.
For more information about this function, see the SINUMERIK 808D/SINUMERIK 808D ADVANCED
Function Manual.
USB interface Connects to a USB device, for example:
•
•
Status LEDs
LED "POK" Solid green: The power supply for the CNC is switched on.
LED "RDY" •
•
•
•
LED "TEMP" •
•
Backlight brightness control
Pressing <CTRL> and the cursor keys sets the screen backlight brightness by an increment of 10%
(brightness range: 10% to 100%).
Note that after you release the key combination, the HMI saves your brightness settings and the
brightness bar disappears after three seconds.
Programming and Operating Manual (Turning)
6FC5398-5DP10-0BA2, 06/2015
Toggles between entries in the input field
Enters the "Set-up menu" dialog at NC start-up
+
An external USB memory stick, to transfer data between the USB stick and the CNC
An external USB keyboard which functions as an external NC keyboard
Solid green: The CNC is ready and the PLC is in running mode.
Solid red: The CNC is in stop mode.
Solid orange: The PLC is in stop mode.
Flashing orange: The PLC is in power-up mode.
Off: The CNC temperature is within the specified range.
Solid orange: The CNC temperature is out of range.
9