5
Part programming
The control system can store a maximum of 300 part programs which include those created by the control system for certain
functions such as MM+, TSM, and so on.
Softkey functions
Pressing this key on the PPU allows you to open the following window:
①
Stores the NC programs for subsequent operations
②
Manages and transfers the manufacturer cycles
③
Reads in/out files via the USB drive and executes the program from the external storage media
④
Reads in/out files via the Ethernet interface and executes the program from an external PC
⑤
Backs up manufacturer files
⑥
Backs up user files
⑦
Shows the recently accessed files
⑧
Executes the selected file. No editing is allowed in the execution process.
⑨
Creates new files or directories
⑩
Searches for files
⑪
Selects all files for the subsequent operations
⑫
Copies the selected file(s) to the clipboard
⑬
Pastes the selected file(s) from the clipboard to the current directory
⑭
Restores the deleted file(s)
⑮
Opens the lower-level menu for more options:
Rename the part programs
•
Cut the part programs
•
②
⑤
Note: Softkeys
and
30
are visible only with the manufacturer password.
Programming and Operating Manual (Turning)
6FC5398-5DP10-0BA2, 06/2015
Need help?
Do you have a question about the SINUMERIK 808D ADVANCED and is the answer not in the manual?