Exernal Data Backup Of Separate Files - Siemens SINUMERIK 808D ADVANCED Programming And Operating Manual

7.2.2 External data backup of separate files
In the program management operating area, program files or directories can be copied into another directory or onto a
different drive by means of copying and pasting operations.
Operating sequence
For more information about data backup, refer to the SINUMERIK 808D ADVANCED Diagnostics Manual.
52
1. Select the desired operating area.
2. Enter the program directory.
3. Select the program file or directory to be backed up. You can alternatively use the following
softkey to search for the desired file or directory:
4. Press this softkey to copy the data to the clipboard.
5. Select a desired directory or drive as the data target.
Backs up the files in the folder for storing the user cycles on the control system. This folder
is visible with the manufacturer password.
Backs up the files onto an USB stick.
Backs up the files onto an external PC. This requires a connected network drive on the
control system. For more information, see section "Configuring the network drive
(Page 44)".
Backs up the files in the folder for storing the manufacturer files on the control system. This
folder is visible with the manufacturer password.
Backs up the files in the folder for storing end user files on the control system.
6. Press this softkey to paste the copied data into the current directory.
Programming and Operating Manual (Turning)
6FC5398-5DP10-0BA2, 06/2015