Siemens SINUMERIK 808D ADVANCED Programming And Operating Manual page 51

Note
Do not remove the USB stick in the process of data backup if you choose USB as the target directory.
Pressing <CTRL + S> when you are in any operating area of the PPU161.3 creates a startup archive on the connected USB
stick. In addition, it automatically saves the action log to the USB stick.
Restoring a startup archive
+
Programming and Operating Manual (Turning)
6FC5398-5DP10-0BA2, 06/2015
4. Select your desired folder and press this key to open it.
5. Press this softkey to confirm and the archive information dialog opens.
6. Specify the properties of the archive and press this softkey. The control system starts crea-
tion of the startup archive.
1. Select the desired operating area.
2. Press this softkey to open the startup archive window.
3. Select the following option and press this softkey to restore the startup archive:
4. Select the backup path to locate the archive file and press this softkey to confirm.
5. Press this softkey to confirm the archive information.
6. Press this softkey to continue and start restoring the startup archive. The control system
restarts to complete restoring the archive.
51