Siemens SINUMERIK 808D ADVANCED Programming And Operating Manual page 34

Copying, cutting, and pasting programs
Deleting/restoring programs
34
6. Press this softkey to start the search.
Pressing this softkey cancels the search.
1. Select the desired operating area.
2. Open the desired directory.
3. Select the program file that you would like to copy.
4. Perform either of the following operations as desired:
Press this softkey to copy the selected file or directory:
•
Press the following softkeys to cut the selected file to the buffer memory:
•
5. Select the target directory with the horizontal softkeys.
6. Press this softkey to paste the file or directory from the clipboard to the current directory.
1. Select the desired operating area.
2. Open the desired directory.
3. Select the program file that you would like to delete.
4. Press this key, and the following message appears on the screen:
5. Press this softkey to confirm the deletion.
Pressing this softkey cancels the operation.
→
Programming and Operating Manual (Turning)
6FC5398-5DP10-0BA2, 06/2015