170
4.
Press one of the following two softkeys . The program automatically jumps to the program
editor screen form.
If you desire to edit and store the contour in a subroutine, press this softkey.
If you desire to edit and store the contour as a section of a main program, press this softkey.
5.
Press this softkey to open the contour editor. Parameterize the contour elements step by
step.
Initially you define a contour starting point and select how to approach the starting point.
Note:
Steps 5 to 10 below describe basic steps for contour element edits. For more information
about programming in the contour editor, see Section "Free contour programming
(Page 217)".
6.
Press this softkey to confirm the settings.
Programming and Operating Manual (Turning)
6FC5398-5DP10-0BA2, 06/2015