Assigning The Handwheel - Siemens SINUMERIK 808D ADVANCED Programming And Operating Manual

4.2.3

Assigning the handwheel

Method 1: Assigning through the PPU
+
Programming and Operating Manual (Turning)
6FC5398-5DP10-0BA2, 06/2015
1. Select the desired operating area.
2. Open the machine data window.
3. Press this softkey to open the basic machine data list.
4. Use the cursor keys or the following softkey to search for the general machine data "14512
USER_DATA_HEX[16]".
5. Select bit 7 by using the following key and cursor keys:
Press the following softkey to confirm your input.
6. Press this vertical softkey to activate the value change. Note that the control system restarts
to accept the new value.
7. After the control system has booted, select the desired operating area.
8. Press this key on the MCP.
9. Press this key to view more menu options.
10. Open the handwheel assignment window.
11. Select the desired handwheel number with the cursor keys.
12. Press the desired vertical softkey (<X> ... <MZ1>) or the following key for the handwheel
assignment.
21