Siemens SINUMERIK 808D ADVANCED Programming And Operating Manual page 214

4.
5.
Example
Calculating the point of intersection between the circle sector ① and the straight line ② in plane G18.
Given: Radius : 10
Circle center point CC: Z=147 X=183 (diameter programming.)
Connection angle for straight lines: -45°
Result: Z = 154.071
X = 190.071
The result appears on the input screen.
214
Enter the circle center, the angle of the tangent and the circle radius in the following win-
dow:
Press this softkey to calculate the abscissa and ordinate values of the point.
The abscissa is the first axis, and the ordinate is the second axis of the plane. The abscissa
value is displayed in the input field from which the calculator function has been called, and
the value of the ordinate is displayed in the next input field. If the function is called from the
part program editor, the coordinates are saved with the axis names of the selected basic
plane.
Programming and Operating Manual (Turning)
6FC5398-5DP10-0BA2, 06/2015