Table of Contents
Advertisement
4. INSTALLATION
3) Others
When using heat generating equipment such as the regenerative brake option, install them with
full consideration of heat generation so that the servo amplifier is not affected.
Install the servo amplifier on a perpendicular wall in the correct vertical direction.
(3) Keep out foreign materials
1) When installing the unit in a control box, prevent drill chips and wire fragments from entering the
servo amplifier.
2) Prevent oil, water, metallic dust, etc. from entering the servo amplifier through openings in the
control box or a fan installed on the ceiling.
3) When installing the control box in a place where there are toxic gas, dirt and dust, provide positive
pressure in the control box by forcing in clean air to prevent such materials from entering the
control box.
4 - 3
Advertisement
Table of Contents
