Enhanced Phone Functions; Incoming Calls; Deflecting A Call - Unify OpenScape IP 35G SIP User Manual

Enhanced phone functions

Deflect
?
089008844
Settings
User
if nec.j
Configuration

Incoming calls

Deflecting?
Allow deflection = No
Yes
Default destination =
Enhanced phone functions
Incoming calls

Deflecting a call

Using call deflection
Prerequisite: An incoming call is displayed or signalled. "Deflect" must be al-
lowed.
m
Select and confirm the option shown.
l
If a destination phone number is stored (
it. The call is deflected.
or
If you did not set a phone number when programming call deflection, you are
now prompted to enter a destination phone number for call deflection.
j
Enter and confirm the destination phone number. The call is deflected.
Permitting call deflection
z
You can also configure this setting via the WBM interface
must be authorised by administrator.
Settings Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
f
Confirm.
l
Select and confirm the option shown.
f
j
Enter and confirm the phone number to which the station should be deflected.
Page 77), you can select and confirm

Page 198. "Deflect"

77