Lenovo System x3650 M5 Installation And Service Manual page 682

Hide thumbs Also See for System x3650 M5:
Table of Contents

Advertisement

201-877-001 • 201-878-000
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
IBM Support Website
v
Latest level of DSA
v
v
Latest level of BMC/IMM
201-877-001
Standalone Memory Test Aborted
Explanation: BIOS: Sparing in Extended PCI reg. must
be OFF. Go to setup and disable sparing.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
v
IBM Support Website
Latest level of DSA
v
Latest level of BMC/IMM
v
201-877-002
Standalone Memory Test Aborted
Explanation: BIOS: Sparing in Extended PCI reg. must
be OFF. Go to setup and disable sparing.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
IBM Support Website
v
668
Lenovo System x3650 M5 Type 5462: Installation and Service Guide
Latest level of DSA
v
Latest level of BMC/IMM
v
201-877-003
Standalone Memory Test Aborted
Explanation: BIOS: Sparing in Extended PCI reg. must
be OFF. Go to setup and disable sparing.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
IBM Support Website
v
Latest level of DSA
v
Latest level of BMC/IMM
v
201-878-000
Standalone Memory Test Aborted
Explanation: Sparing feature must be turned OFF. Go
to setup and turn the sparing feature OFF.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
IBM Support Website
v
Latest level of DSA
v
v
Latest level of BMC/IMM

Advertisement

Table of Contents
loading

Table of Contents