Lenovo System x3650 M5 Installation And Service Manual page 398

800b0509-1301ffff • 800b050a-1e83ffff
CIM Information: Prefix: PLAT and ID: 0806
SNMP Trap ID: 43
Automatically notify Support: No
User response:
1. Check the system-event log for DIMM failure
events (uncorrectable or PFA) and correct the
failures.
2. Re-enable mirroring in the Setup utility.
800b0509-1301ffff Non-redundant:Insufficient
Resources for
[RedundancySetElementName] has
asserted. (Power Resource)
Explanation: This message is for the use case when a
Redundancy Set has transitioned to
Non-redundant:Insufficient Resources.
May also be shown as 800b05091301ffff or
0x800b05091301ffff
Severity: Error
Alert Category: Critical - Redundant Power Supply
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0810
SNMP Trap ID: 9
Automatically notify Support: No
User response:
1. Power load may be handled by remaining power
supply. The system will attempt to throttle to avoid
a power supply over-current condition. But a
system shutdown may happen anyway if the power
load is too great.
2. Reduce the total power consumption by removing
newly added or unused options like drives or
adaptors.
3. Use the IBM Power Configurator utility to
determine current system power consumption. For
more information and to download the utility, go to
http://www-03.ibm.com/systems/bladecenter/
resources/powerconfig.html.
4. Replace the power supply with higher rated power
if Oversubscription_Fault seen in power supply.
5. Please reseat power cords and power supplies.
800b050a-1e81ffff Non-redundant:Insufficient
Resources for
[RedundancySetElementName] has
asserted. (Fan Zone 1)
Explanation: This message is for the use case when a
Redundancy Set has transitioned to
Non-redundant:Insufficient Resources.
384
Lenovo System x3650 M5 Type 5462: Installation and Service Guide
May also be shown as 800b050a1e81ffff or
0x800b050a1e81ffff
Severity: Error
Alert Category: Critical - Fan Failure
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0810
SNMP Trap ID: 11
Automatically notify Support: No
User response:
1. Make sure that the connectors on fan n are not
damaged.
2. Make sure that the fan n connectors on the system
board are not damaged.
3. Make sure that the fans are correctly installed.
4. Reseat the fans.
5. Replace the fans. (n = fan number)
800b050a-1e82ffff Non-redundant:Insufficient
Resources for
[RedundancySetElementName] has
asserted. (Fan Zone 2)
Explanation: This message is for the use case when a
Redundancy Set has transitioned to
Non-redundant:Insufficient Resources.
May also be shown as 800b050a1e82ffff or
0x800b050a1e82ffff
Severity: Error
Alert Category: Critical - Fan Failure
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0810
SNMP Trap ID: 11
Automatically notify Support: No
User response:
Make sure that the connectors on fan n are not
1.
damaged.
Make sure that the fan n connectors on the system
2.
board are not damaged.
Make sure that the fans are correctly installed.
3.
Reseat the fans.
4.
5. Replace the fans. (n = fan number)
800b050a-1e83ffff Non-redundant:Insufficient
Resources for
[RedundancySetElementName] has
asserted. (Fan Zone 3)
Explanation: This message is for the use case when a
Redundancy Set has transitioned to
Non-redundant:Insufficient Resources.