Figure 172. Screw installation
9. Connect the front video cable to the system board.
Front video cable
Figure 173. Cable connection
10. Replace the fan cage assembly (see "Replacing the fan cage assembly" on page
176).
11. Replace the top cover (see "Replacing the top cover" on page 148).
12. Slide the server into the rack.
13. Reconnect the power cords and any cables that you removed.
14. Turn on the peripheral devices and the server.
3.5-inch model: There are the right EIA assembly and the left EIA assembly on
the server, use the following steps to replace them.
For the right EIA assembly
1. Read the safety information that begins on "Safety" on page v and
"Installation guidelines" on page 294.
Screws
Chapter 5. Removing and replacing components
225