Lenovo System x3650 M5 Installation And Service Manual page 348

4000000e-00000000 • 40000012-00000000
Serviceable: No
CIM Information: Prefix: IMM and ID: 0013
SNMP Trap ID:
Automatically notify Support: No
User response: Complete the following steps until the
problem is solved:
1. Make sure that the IMM network cable is
connected.
2. Make sure that there is a DHCP server on the
network that can assign an IP address to the IMM.
4000000e-00000000 Remote Login Successful. Login
ID: [arg1] from [arg2] at IP address
[arg3].
Explanation: This message is for the use case where a
user successfully logs in to a Management Controller.
May also be shown as 4000000e00000000 or
0x4000000e00000000
Severity: Info
Alert Category: System - Remote Login
Serviceable: No
CIM Information: Prefix: IMM and ID: 0014
SNMP Trap ID: 30
Automatically notify Support: No
User response: Information only; no action is
required.
4000000f-00000000 Attempting to [arg1] server [arg2]
by user [arg3].
Explanation: This message is for the use case where a
user is using the Management Controller to perform a
power function on the system.
May also be shown as 4000000f00000000 or
0x4000000f00000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0015
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
334
Lenovo System x3650 M5 Type 5462: Installation and Service Guide
40000010-00000000 Security: Userid: [arg1] had [arg2]
login failures from WEB client at IP
address [arg3].
Explanation: This message is for the use case where a
user has failed to log in to a Management Controller
from a web browser.
May also be shown as 4000001000000000 or
0x4000001000000000
Severity: Warning
Alert Category: System - Remote Login
Serviceable: No
CIM Information: Prefix: IMM and ID: 0016
SNMP Trap ID: 30
Automatically notify Support: No
User response: Complete the following steps until the
problem is solved:
1. Make sure that the correct login ID and password
are being used.
2. Have the system administrator reset the login ID or
password.
40000011-00000000 Security: Login ID: [arg1] had
[arg2] login failures from CLI at [arg3].
Explanation: This message is for the use case where a
user has failed to log in to a Management Controller
from the Legacy CLI.
May also be shown as 4000001100000000 or
0x4000001100000000
Severity: Warning
Alert Category: System - Remote Login
Serviceable: No
CIM Information: Prefix: IMM and ID: 0017
SNMP Trap ID: 30
Automatically notify Support: No
User response: Complete the following steps until the
problem is solved:
1. Make sure that the correct login ID and password
are being used.
2. Have the system administrator reset the login ID or
password.
40000012-00000000 Remote access attempt failed.
Invalid userid or password received.
Userid is [arg1] from WEB browser at IP
address [arg2].
Explanation: This message is for the use case where a
remote user has failed to establish a remote control
session from a Web browser session.