Lenovo System x3650 M5 Installation And Service Manual page 434

806f0125-2c01ffff • 806f0207-2584ffff
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0392
SNMP Trap ID:
Automatically notify Support: No
User response: Please ensure the PCI riser 1 has been
installed correctly.
806f0125-2c01ffff [ManagedElementName] detected
as absent. (ML2 Card)
Explanation: This message is for the use case when an
implementation has detected a Managed Element is
Absent.
May also be shown as 806f01252c01ffff or
0x806f01252c01ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0392
SNMP Trap ID:
Automatically notify Support: No
User response: Ensure PCI riser 1 and ML2 card are
installed correctly.
806f0207-0301ffff [ProcessorElementName] has
Failed with FRB1/BIST condition. (CPU
1)
Explanation: This message is for the use case when an
implementation has detected a Processor Failed -
FRB1/BIST condition.
May also be shown as 806f02070301ffff or
0x806f02070301ffff
Severity: Error
Alert Category: Critical - CPU
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0044
SNMP Trap ID: 40
Automatically notify Support: Yes
User response:
1. Make sure that the latest levels of firmware and
device drivers are installed for all adapters and
standard devices such as Ethernet and storage
adapters. Important: Some cluster solutions require
specific code levels or coordinated code updates. If
the device is part of a cluster solution, verify that
the latest level of code is supported for the cluster
solution before you update the code.
420
Lenovo System x3650 M5 Type 5462: Installation and Service Guide
2. Update the firmware (UEFI and IMM) to the latest
level (Updating the firmware).
3. Run the DSA program.
4. Remove the adapter to see if the problem is
follwed adapter. if not, replace the adapter.
5. (Trained technician only) Replace microprocessor n.
(Trained technician only) Replace the system board.
6.
(n = microprocessor number)
806f0207-0302ffff [ProcessorElementName] has
Failed with FRB1/BIST condition. (CPU
2)
Explanation: This message is for the use case when an
implementation has detected a Processor Failed -
FRB1/BIST condition.
May also be shown as 806f02070302ffff or
0x806f02070302ffff
Severity: Error
Alert Category: Critical - CPU
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0044
SNMP Trap ID: 40
Automatically notify Support: Yes
User response:
Make sure that the latest levels of firmware and
1.
device drivers are installed for all adapters and
standard devices such as Ethernet and storage
adapters. Important: Some cluster solutions require
specific code levels or coordinated code updates. If
the device is part of a cluster solution, verify that
the latest level of code is supported for the cluster
solution before you update the code.
2. Update the firmware (UEFI and IMM) to the latest
level (Updating the firmware).
3. Run the DSA program.
4. Remove the adapter to see if the problem is
follwed adapter. if not, replace the adapter.
5. (Trained technician only) Replace microprocessor n.
(Trained technician only) Replace the system board.
6.
(n = microprocessor number)
806f0207-2584ffff [ProcessorElementName] has
Failed with FRB1/BIST condition. (All
CPUs)
Explanation: This message is for the use case when an
implementation has detected a Processor Failed -
FRB1/BIST condition.
May also be shown as 806f02072584ffff or
0x806f02072584ffff
Severity: Error