When User Authentication Is Enabled - Sharp MX-5500N System Settings Manual

When User Authentication is Enabled

When "User Authentication
When auto login is enabled, the login screen will not appear.
When user authentication is by login name and password (and e-mail
address)
Administrator login is performed in the user selection screen. For more information on the login procedure when user
authentication is enabled, see "USER AUTHENTICATION" in the User's Guide.
Device Account Mode User Selection
6 12 18
Name 1
Name 3
Admin Login
Name 5
1
Direct Entry
Name 7
Name 9
Name 11
ABC
All Users
User
User Authentication
Login Name
Administrator
User Name
Password
Auth to:
Login Locally
2
(1)
• If login name / password / e-mail address is selected for the authentication method, the [E-mail Address] key will
appear below the "User Name".
• For the factory default administrator password, see "TO THE ADMINISTRATOR OF THE MACHINE" in the Safety
Guide.
• This completes the administrator login procedure. The system settings (administrator) can be used.
Setting" (page 46) is enabled, follow the procedure below to log in.
Name 2
Name 4
Name 6
Name 8
Name 10
Name 12
ABCD EFGHI JKLMN OPQRST
(2)
Touch the [Admin Login] key.
Back
1
2
UVWXYZ
Log in.
OK
(1) Touch the [Password] key.
Enter the administrator password in the administrator
password entry screen.
(2) Touch the [OK] key.
30