Performing "Scan To Hdd - Sharp MX-B402 Operation Manual

PERFORMING "Scan to HDD"

Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
Placing the original on the document glass
1
(4) (2)
COPY IMAGE SEND
Ready to scan to HDD.
Press [Start] to scan original.
File Retrieve Scan to HDD
File
Original
Information
Exposure
Resolution
2
Color Mode
Special Modes
Preview
If the original is 2-sided, be sure to touch the [Original] key and then touch the [2-Sided Booklet] key or the [2-Sided
Tablet] key as appropriate for the original.
Press the [START] key.
Scanning begins.
For the procedure for placing the original, see step 4 of
When Preview is enabled, the preview screen appears.
☞
3
Checking the image before storing it (Preview)
A beep will sound to indicate that Scan to HDD is completed.
To cancel scanning...
Press the [STOP] key (
Portrait original
Landscape original
c b a
(1) (3)
DOCUMENT
FILING
HDD Status Ex Data Access
Auto
Scan: Store:
8½x11
Auto
200X200dpi
Mono2
(page 6-22)
).
Align the top edge of the
original against the side of
the document glass with
the scale.
Align the right side of the
original against the side of
the document glass with
the scale.
Switch to document filing mode and
select Scan to HDD settings.
(1) Touch the [DOCUMENT FILING] key.
(2) Touch the [Scan to HDD] tab.
If you do not wish to select settings, go to the next step.
(3) Select the original size, exposure,
resolution, color mode, and special modes.
See ""Scan to HDD"
(4) Touch the [File Information] key.
The settings are the same as for "File". See
INFORMATION" (page 6-15).
"SAVING A FILE WITH "Quick
6-23
DOCUMENT FILING
SCREEN" (page 6-18).
"FILE
File"" (page 6-11).
Contents