Checking Information On A Copy Job Waiting In The Queue - Sharp DX-2500N Operation Manual

CHECKING INFORMATION ON A COPY JOB WAITING
IN THE QUEUE
Detailed information can be displayed on a copy job waiting in the queue.
1
(1)
Print Job Scan to
Job Queue Sets / Progress
1 Copy
2
Copy
3 Computer01
4 0312345678
2
[Paper Select] key
If a copy job is stopped because the paper ran out, the [Paper Select] key can be pressed to change to a
different paper tray.
When the [Paper Select] key is pressed, the paper tray selection screen appears.
+
PAPER TRAYS
Touch the key of the tray that has the size of paper that you wish to use and then touch the [OK] key. The
stopped copy job will resume.
(2)
Fax Job
Internet Fax
Status
Spool
020 / 001 Copying
Job Queue
002 / 000 Waiting 1 Complete
1
002 / 000
Waiting
001 / 000
Waiting
Detail
Priority
Stop/Delete
(3)
(page 2-11)
Press the [JOB STATUS] key (
Checking job details
(1) Touch the [Print Job] tab.
(2) Change the print job status mode to [Job
Queue].
Touch this key to change modes. The selected mode will
be highlighted.
(3) Touch the key of the job that you wish to
check.
(4) Touch the [Detail] key.
(4)
The job check screen of the job selected in (3) appears.
Detail
Copy
Colour / B/W: Full Colour
Exposure: 1
A4
Paper:
Plain
Copy Ratio: X100% Y100%
2-145
COPIER
).
OK
002 / 000 Waiting
2-Sided
Copy:
3 5 Output:
Special
Paper Select
Modes:
Contents