Manually Selecting The Ratio (Preset Ratios/Zoom) - Sharp MX-4100N Operation Manual

MANUALLY SELECTING THE RATIO (Preset
ratios/Zoom)
Touch the [Copy Ratio] key in the base screen of copy mode to select one of five preset enlargement ratios or four
preset reduction ratios (maximum 400%, minimum 25%).
In addition, the zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.
Copy Ratio
11x17 8½x11
64%
8½x11 5½x8½
11x17 8½x14
77%
8½x14 8½x11
Auto Image XY Zoom
(A)
1
Copy Ratio
25%
50%
75%
99%
Auto Image XY Zoom
• (A) keys
The keys marked (A) can be set to show any ratio using "Add or Change Extra Preset Ratios" in the system settings
(administrator).
• To quickly select a ratio, touch a reduction or enlargement key to select a ratio close to the desired ratio and then
use the zoom keys for fine adjustment.
• The zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.
Touch the
key, the ratio will change automatically. After 3 seconds, the ratio will change rapidly.)
• As an alternative to touching the
change the value with the numeric keys.
• If the message "Image is larger than the copy paper." appears when an enlargement ratio is selected, the image
may not fit on the paper.
OK
100
%
121% 8½x14 11x17
1
8½x11 11x17 2
Zoom
129%
5½x8½ 8½x11
100%
OK
100
%
200%
2
2
Zoom 400%
300%
100%
350%
key to increase the ratio, or the
keys, you can also directly touch the numeric value display key and
Set the ratio.
Touch a preset ratio key and/or the zoom keys to set the ratio.
There are two setting screens. Use the
between the screens.
● 1st screen
• Enlargement keys (2 ratios): 121% and 129%
• Reduction keys (2 ratios): 64% and 77%
• [100%] key
● 2nd screen
• Enlargement keys (2 to 4 ratios)
200%, 400%, any ratio (max. of two)
• Reduction keys (2 to 4 ratios)
25%, 50%, any ratio (max. of two)
• [100%] key
key to decrease the ratio. (If you continue to touch the
2-26
COPIER
keys to switch
/
Contents