Manually Selecting The Ratio (Preset Ratios/Zoom) - Sharp MX-3114N Operation Manual

MANUALLY SELECTING THE RATIO (Preset
ratios/Zoom)
Touch the [Copy Ratio] key in the base screen of copy mode to select one of five preset enlargement ratios or five (four)
preset reduction ratios (maximum 400%, minimum 25%).
In addition, the zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.
Copy Ratio
B4 B5
70%
A3 A4
B5 A5
81%
B4 A4
A4 B5
86%
A3 B4
Auto Image XY Zoom
(A)
1
Copy Ratio
25%
50%
75%
99%
Auto Image XY Zoom
• (A) keys
The keys marked (A) can be set to show any ratio using "Add or Change Extra Preset Ratios" in the system settings
(administrator).
• To quickly select a ratio, touch a reduction or enlargement key to select a ratio close to the desired ratio and then
use the zoom keys for fine adjustment.
• The zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.
Touch the
key, the ratio will change automatically. After 3 seconds, the ratio will change rapidly.)
• As an alternative to touching the
change the value with the numeric keys.
• If the message "Image is larger than the copy paper." appears when an enlargement ratio is selected, the image
may not fit on the paper.
OK
100
B5 A4
%
115%
B4 A3
1
A5 B5 2
Zoom
122%
A4 B4
B5 B4
141%
A4 A3
100%
OK
100
%
200%
2
2
Zoom 400%
300%
100%
350%
key to increase the ratio, or the
keys, you can also directly touch the numeric value display key and
Set the ratio.
Touch a preset ratio key and/or the zoom keys to set the ratio.
There are two setting screens. Use the
between the screens.
● 1st screen
• Enlargement keys:
115%, 122% and 141% (for the AB system).
121% and 129% (for the inch system).
• Reduction keys:
70%, 81% and 86% (for the AB system).
64% and 77% (for the inch system).
• [100%] key
● 2nd screen
• Enlargement keys (2 to 4 ratios)
200%, 400%, any ratio (max. of two)
• Reduction keys (2 to 4 ratios)
25%, 50%, any ratio (max. of two)
• [100%] key
key to decrease the ratio. (If you continue to touch the
2-26
COPIER
keys to switch
/
Contents