Table of Contents
Advertisement
5.1.16 Setting Call-Sound for Incoming Call
User can set to ring or not to ring a terminal connected to the main unit, when a call arrived. Also, by
selecting the time, user can set the time (seconds) to call up the terminal after the call arriving. This
function can be set by Web interface also (refer to [6.5.2.3 Set Telephone Supplementary Service
(p6-40)]).
Setting
Enable
After 5s
After 10s
After 20s
Disable
To set the In (Incoming) Call "Enable" on Handset port:
8 Alarmpack
9 Admin
2 Telephony
3 Port
Enter the
1 Telephony
Secret code.
2 PBX
Press
CLR
button repeatedly
to return to Idle
screen.
Rings when a call is arrived on JUE-501/JUE-251 main unit.
Rings after 5 seconds later since a call has arrived on JUE-501/JUE-251
main unit.
Rings after 10 seconds later since a call has arrived on JUE-501/JUE-251
main unit.
Rings after 20 seconds later a call has arrived on JUE-501/JUE-251 main
unit.
Not sounds
Top menu screen
Select [9 Admin] and press
Admin menu screen
READY
1 Handset
2 TEL1
3 Out Call
4 In Call
Enable
After 5s
After 10s
After 20s
Disable
Fig 5.1.16 In Call setting method
5-29
5. How to use the Telephone/FAX
Function
Select [2 Telephony] and press
Telephony menu screen
Select [1 Telephony] and press
Telephony setting item selection menu screen
Select [1 Handset] and press
Handset menu screen
Select [4 In Call] and press
In Call setting screen
Select and press
Return to idle screen by pressing
button several times or pressing
button once.
OK
button.
OK
button.
OK
button.
OK
button.
OK
button.
OK
button.
CLR
Advertisement
Table of Contents
