Handling Call Waiting; Clear The Current Call, And Accept The Waiting Call; Hold The Current Call, And Accept The Waiting Call; Ignore The Waiting Call - JRC JUE-501 Instruction Manual

5. How to use the telephone/FAX

5.1.8 Handling Call Waiting

You may hear a call waiting Indication during talking on the phone. The call waiting Indication tone
is two beeps every three seconds. To handle call waiting with Handset, use
right side of Handset. Enable / disable call waiting is performed by Web setting (refer to [6.5.2.3 Set
Telephone Supplementary Service (p6-40)]).
Follow the procedure below as desired.

Clear the current call, and accept the waiting call.

Press FN １ #, during the call waiting indication is ringing.

Hold the current call, and accept the waiting call.

Press FN 2 #, during the call waiting indication is ringing.
To exchange the held call for the active call, press
To clear the active call and back to the held call, press

Ignore the waiting call.

Just ignore the waiting call indication (take no action).
Reject the waiting call.
FN 0 #.
Press
The BGAN system supports only one Call Waiting at the same time.
These functions have not been supported yet.
A new version supporting them will be released at the end of March 2014.
FN 2 #.
FN 1 #.
Fig.5.1.7 FN button
NOTE
5-16
FN (Function) button on
FN button