Table of Contents
Advertisement
4. Getting started
4.2.4 Setting satellite search
In this section, setting of Satellite search is explained. Select [3 Satellite] from [Top menu], and select
[1 Satellite] from displayed [Satellite] menu screen.
Current setting is displayed with
buttons, and press
OK
button (by selecting [Auto], suitable satellite is automatically chosen).
JUE-501/JUE-251 automatically acquires the satellite which is suitable for communication from
the ship and which has high-elevation. However, the acquisition may fail because of a blocking
due to affection of an antenna and a blockage.
the lowest line of the Handset screen or the antenna icon starts blinking at the top line. Select
available satellite which is able to communicate and is not blocked.
3 S a t e l l i t e
4 P h o n e b o o k
OK
1 S a t e l l i t e
2 Sp o t B e a m
* Although there is nothing wrong with JUE-501/JUE-251, selecting satellite makes some noise
on ADE.
* Handset will display the suitable satellites from the operating satellites.
AMER W98.0
APAC E143.5
EMEA E25.0
*
mark on its line head. To change it, move the cursor by ___
APAC E143.5
14:03 UTC
SEARCH NG
Fig. 4.2.3b SEARCH NG status of Idle screen
READY
OK
Select with a cursor, and press
Then the screen is returned to Top menu.
Fig. 4.2.3a Flow of Satellite selection
(Americas satellite)
(APAC satellite)
(EMEA satellite)
4-14
In this case, Handset shows "SEARCH NG" at
Satellite display
Auto
*AMER W98.0
APAC E143.5
EMEA E25.0
OK
OK
button.
Advertisement
Table of Contents
