Table of Contents
Advertisement
5. How to use the telephone/FAX
5.1.15 Restricting Outgoing Call
Admin user can control originating a call from the terminal connecting to the port. This function can be
set by Web interface also (refer to [6.5.2.1 Set up Ports (p6-37)]).
Setting
Enable
Allowed Num
Phonebook
Disable
If this function is set to Disable, busy tone is heard when you Off-hook the Handset.
unavailable.
To set the Out (Outgoing) Call "Enable" on Handset port:
APAC E143.5
14:03 UTC
8 Alarmpack
9 Admin
2 Telephony
3 Port
Enter the
Secret code.
1 Terminal
2 Telephony
CLR
Press
button repeatedly
to return to Idle
screen.
Function
Originating a call is permitted.
Originating a call only to the allowed
number (maximum 4) is permitted.
Originating a call only to the number
registered in phonebook is permitted.
Originating a call is prohibited.
READY
READY
1 Telephony
2 PBX
1 Handset
2 TEL1
3 Out Call
4 In Call.
Enable
AllowedNum
Phonebook
Disable
Fig 5.1.15 Out Call setting method
5-28
Idle screen
Press
MENU
button.
Top menu screen
Select [9 Admin] and press
Admin menu screen
Select [2 Telephony] and press
Telephony menu screen
Select [1 Telephony] and press
Telephony setting item selection menu screen
Select [1 Handset] and press
Handset menu screen
Select [3 Out Call] and press
Out Call setting screen
Select item and press
select AllowedNum, list of allowed
number will appear. You can edit it by
pressing MENU.
Return to idle screen by pressing
button several times or pressing
button once.
Dialing is
OK
button.
OK
button.
OK
button.
OK
button.
OK
button.
OK
button. If you
CLR
Advertisement
Table of Contents
