Registering The Ship's Group Id; Setting The Inactivity Timeout Timer - JRC JHS-770S Instruction Manual

Settings & Registrations
5.5.5

Registering the ship's group ID

Register the group ID (group ship ID number) for receiving group calls.
■ ■
Procedure
1 1 . .
1 .
Move the cursor to 6. Group ID, and press ENT.
The screen as shown at right is displayed.
2 2 . .
2 .
Move the cursor to register the ID number and
press ENT, then input the 9 digits ID (leftmost
digit fixed to 0).
 Upto 20 groups can be registered.
 To delete all data, "00.ALL CLEAR function" located at
the bottom line is available.
 When finished, press
5.5.6

Setting the inactivity timeout timer

If a call event is left without operation for a while, the call event is automatically ended after the setting time is
elapsed. The inactivity timeout timer can be set as follows.
■ ■
Procedure
Move the cursor to 7. Inactivity timeout, and press
ENT.
The screen as shown at right is displayed.
Change the settings as appropriate.
1. ACKed distress alert
The acknowledged distress alert events sent from
the own ship:
- The range is 00 (OFF) to 60 minutes.
2. RCVed other distress
The distress events of other ships
- The range is 00 (OFF) to 60 minutes.
3. Non-distress call
Routine, safety and urgency events
- The range is 00 (OFF) to 60 minutes.
4. Other communications
Communications without using DSC
- The range is 010 to 600 seconds.
(This timer cannot be set to OFF.)
5-14
CANCEL key.
9.5.6)Group ID
No 9-digit ID number
01 043100001
02 0
03 0
04 0
05 0
06 0
07 0
9.5.7)Inactivity timeout
1.ACKed DIST alert :OFF
2.RCVed other DIST :OFF
3.Non-DIST call :15min
4.Other COMM :030sec
0.Back