Table of Contents
Advertisement
Announced Forwarding
Announced Forwarding forwards an outside call to local terminals connected to the BDE after a talk
on internal call.
The outside caller will wait until your conversation will end hearing the
suspension tone.
To use Announced Forwarding, press 0
specified terminal will ring and you can talk with the forwarding destination on internal call. Press
the On hook button (
Then the forwarding destination and the outside caller will start talking.
Extension numbers of the JUE-501/JUE-251 are designated as follows.
Device
Handset
TEL1~TEL6
All TEL ports and Handset
ISDN (Set PBX-MSN. Refer to p6-43.)
IPTEL1~IPTEL9
(Release software at end of 2013 will support)
All
Example) Terminal telephone connected with TEL port 1..... 0
HDST-Voice
1 2 m 2 9 s
COMM(OUT)
Internal
T E L 1
COMM(OUT)
APAC E143.5
14:03 UTC
CS PS READY
To cancel forwarding mode, press
Forwarding mode will be cancelled and return to [on communication status]
*
and the extension number during the communication. The
) or place the Handset on the cradle after your internal call finished.
Table 5.1.9b Allocated Extension Number
On communication screen
extension
Press 0
*
and the
Press 0
*
001 to transfer to the terminal telephone connected with
TEL port 1.
*
401 to transfer the telephone connected with ISDN port.
Press 0
On communication screen for Internal call
The specified terminal will ring and on communication screen for
internal call will be displayed after your party takes the phone. Press
the On hook button (
your internal call finished.
Idle screen
The specified terminal will start communication with the outside call.
The screen backs to the idle screen.
* *+* *
*.
5-15
5. How to use the Telephone/FAX
Allocated number
000
001~006
099
401
501~509
999
*
+001→ internal call→ [On-hook]
number(to be transferred).
) or place the Handset on the cradle, after
Advertisement
Table of Contents
