Panel Led Setting; Ether Led Setting - JRC JUE-501 Instruction Manual

7.9.1.7 Panel LED setting

In this menu, user with Admin authority can set ON/OFF of the LEDs on front panel of main unit.
Select [7 Panel LED] from [Terminal menu]. Then present setting is displayed on [Panel LED setting
screen].
To change the setting select ON or OFF by
8 Al a r m pa c k
9 Admin
1 Terminal
2 Te l e p h o n y
READY
6 WRF
7 Panel LED
Terminal menu screen
Fig. 7.9.1.7 Panel LED Setting screen

7.9.1.8 Ether LED setting

User with Admin authority can set ON/OFF of the LEDs on Ethernet connector also.
Select [8 Ether LED] from [Terminal menu]. Then present setting is displayed on [Ether LED setting
screen].
To change the setting select ON or OFF by
8 Al a r m pa c k
9 Admin
1 Terminal
2 Te l e p h o n y
READY
7 Panel LED
8 Ether LED
Terminal menu screen
Fig. 7.9.1.8 Ether LED Setting screen
buttons and press
Panel LED setting screen
ON
OFF
OK
buttons and press
Ether LED setting screen
ON
OK
OFF
7-43
7. Handset Menu System
( MENU+ 9 +1 +7)
OK .
OK
( MENU+ 9 +1 +8)
OK .
OK