Displaying Call Log - JRC JUE-501 Instruction Manual

Inmarsat fleetbroadband fb500/fb250 maritime satellite communication terminal
Hide thumbs Also See for JUE-501:
Table of Contents

Advertisement

5.1.14 Displaying Call Log

Call Log is displayed in eight service types Voice, Fax, Audio, UDI, RDI, SMS, Standard and
Streaming IP for JUE-501 and six service types Voice, Fax, Audio, SMS, Standard and Streaming IP for
JUE-251. They are divided into three kinds of screens, Both (outgoing and incoming), Out (outgoing
only), and In (incoming only).
1. Voice
Making and receiving a call from/to Handset or terminal telephone connected
to TEL or ISDN port
2. Fax
Sending and receiving a facsimile from/to the fax connected to TEL or ISDN
port
3.Audio
Using 3.1kHz Audio service on the terminal connected to ISDN or TEL port
4. UDI
Using UDI service on the terminal connected to ISDN port
5. RDI
Using RDI service on the terminal connected to ISDN port
6. SMS
Sending and receiving a SMS from/to the PC connected to Ethernet or
Handset port
7. Standard
Using Standard IP service on the PC connected to User LAN port
8. Streaming
Using Streaming IP service on the PC connected to User LAN port
*
[4 UDI] and [5 RDI] menus are not displayed for JUE-251.
*
[Out] and [In] call log displays maximum 100 data on Handset, respectively.
[Both] call log stores latest 100 data of above both directions.
*
Calls are classified into three transmission types, Both (outgoing and incoming transmission), Out
(outgoing only), and In (incoming only), except [7. Standard] and [8. Streaming].
To check the contents, follow the instruction shown in next page.
5. How to use the Telephone/FAX
5-25

Advertisement

Table of Contents
loading

Table of Contents