Pin Mode Setting; Pin Input Setting Procedure; Pin Mode Menu - JRC JUE-501 Instruction Manual

7.9.6.1 PIN Mode setting

In this menu, Enable/Disable of PIN entry can be set.
Setting [Enable], PIN entry is required when turning OFF/ON of the power source.
Setting [Disable], PIN entry is not required when turning OFF/ON of the power source.
Set [Enable] prior to changing the PIN at next subsection [7.9.6.2 Change PIN setting (p7-72)]

PIN Input setting procedure

1) Select [1 PIN Mode] and press OK, then PIN Input setting screen is displayed. Select Enable or Disable
of PIN entry, and press OK.
2) SIM PIN input screen is displayed. Input exist PIN (4-digit) and then press OK.
About releasing method of PIN locking (it occurs when the input error exceeds three times), refer to
[Releasing PIN locking and new PIN setting procedure (p7-71)].
PIN Input setting procedure
Top menu screen
9 Admin
0 SERVICE
5 Auto Dcn.
6 SIM
1 PIN Mode
2 Change PIN
SIM Menu screen
Error
Returns to SIM Menu, even the SIM PIN
is incorrectly entered.
PIN Input setting screen
ＯＫ
Enable
Disable
Input is
succeeded
SIM PIN input screen
OK
SIM PIN?
Fig. 7.9.6.1a PIN Mode menu
7-69
7. Handset Menu System
（ MENU+ 9 +6+1）
ＯＫ
3
****
Remaining number
before PIN lock