Ssas Schedule Confirmation/Setting; Setting Up Ssas Schedule - JRC JUE-87 Instruction Manual

3.2 SSAS Schedule Confirmation/Setting

3.2.1 Setting up SSAS Schedule

This section describes how to set up for sending the security message to the telex terminal on the terrestrial
network.
Password setting is required before setup Ship Security Alert System.
Prepare an arbitrary figure of 4-digit.
Step 1 Press <ESC> until the screen clear.
Step 2 Press <ALT> + <U> to obtain "Set up" menu box.
[Changing and setting password]
Step 3 Procedure of "Password Change" is needed when you use this transmission in the first time, or you
want to change old password. Select "passWord" key by moving cursor to "Password" and press
Enter key. "Password Change" dialog box is displayed.
NOTE
Set up
Password Change
Date & time
confiG
Old
log-Out initiation
New
log-In initiation
New(Confirm)
Performance test initiation
Scheduled transmission
F10:Previous
Land id registration for polling
dnid seleCtion
Peripheral Function
passWord
EPADR informAtion
F10:Previous
Fig.3.2.1b Password Change Dialogue Box
3-2
Set up
Date & time
confiG
log-Out initiation
log-In initiation
Performance test initiation
Scheduled transmission
Land id registration for polling
dnid seleCtion
Peripheral Function
passWord
EPADR informAtion
Fig.3.2.1a Setup Menu Box
:
:
:
F10:Previous