JRC JUE-501 Instruction Manual page 339

1) 2)
Display
1) Terminal
2) MSISDN
3) Incoming Type
4) SET
* Terminals set to "All" rings all incoming call regardless of the incoming MSISDN and
uses Primary Voice MSISDN to make a call.
* To use Multi Number function, Multi-Voice function needs to be enabled.（To be advised.）
* Terminals whose outgoing type is set to Fax or Audio uses MSISDNs set here when they
are forced to make a voice call.
3)
The objective terminal/port.
MSISDN assigned to the terminal.
Displays incoming service type set in the [Sec. 6.5.2.1 Set up
Ports]
Registers the settings.
Note
J-5
Appendix J Multi-Voice Service
4)
Contents