Table of Contents
Advertisement
6. Web Menu System
1)
Start
2)
End
3)
Disp
4)
Priority
5)
Action
6)
Protocol No.
7)
Source IP
8)
Source Mask
9)
Source Port
10)
Destination IP
11)
Destination Mask
12)
Destination Port
13)
Set
Table 6.5.5.2 Contents of Packet Filter Screen
View Range
Minimum ID number to display (1～100）
Maximum ID number to display (1～100)
Display the ID range
Packet Filter
Order of priority for packet filter setting
Range：1 to 255 (The highest priority is 1 and the lowest priority is 255)
Setting whether to Pass or Drop the packet
Setting the protocol （Disable / ALL / TCP / UDP /ICMP / Select No.）
to filter
When "Select No." is selected, protocol number can be input.
When TCP/UDP is selected, Source Port 9) and Destination Port 12) can
be input.
When "Disable" is selected, the filter is deleted.
Packet source IP address to filter
When it remains blank, the filter is adopted to all IP Address.
Specified with the Source Mask 8), it defines the network address to
filter.
Subnetwork Mask for the packet source
Select "255.255.255.255/32" to apply the filter only to the Source IP 7).
The source TCP/UDP port number of the packets to be filtered
"-" represents range. Ex) 20-80 set from 20 to 80.
When it remains blank, the filter is adopted to all TCP/UDP port.
Packet destination IP address to filter
When it remains blank, the filter is adopted to all IP Address.
Specified with the Destination Mask 11), it defines the network address
to filter.
Subnetwork Mask for the packet destination
Select "255.255.255.255/32" to apply the filter only to the Destination
IP 10).
The destination TCP/UDP port number of the packets to be filtered
"-" represents range. Ex) 20-80 set from 20 to 80.
When it remains blank, the filter is adopted to all TCP/UDP port.
Set the packet filter
6-62
Advertisement
Table of Contents
