Table of Contents
Advertisement
6. Web Menu System
Reset Cycle setting menu is on the bottom of this page. Reset Cycle defines the cycle to reset the
count of communication time and size
Fig. 6.5.4.3b Usage Restriction (Reset Cycle Setting) Screen
Set Reset Cycle
Step1: Select the "Term" from Manually, Monthly, Weekly and Daily. The following boxes are
activated as your "Term" selection.
Step2: Click "Set" button to register your Reset Cycle.
* When "Manually" is selected, the user need to reset the count regularly.
* In the case where there is no reset date according to the month, JUE-501/251 resets the count on
the last day of the month.
Reset the Count Manually
Just click "Reset" button.
6.5.5 Network Menu
Network menu is on the left [menu] panel.
In this menu, user can design flexible Local Area Network.
Network Menu contains following screens.
WAN Profile Screen （Sec. 6.5.5.1 Set WAN Profile）
・
Packet Filter Screen （Sec. 6.5.5.2 Set Packet Filter）
・
Always Activate Screen （Sec. 6.5.5.3 Set Permanent Connection）
・
Remote Activate Screen （Sec. 6.5.5.4 Establish Remote Connection）
・
LAN Group Screen （Sec. 6.5.5.5 Set LAN Group）
・
LAN Screen （Sec. 6.5.5.6 Further Settings for User LAN）
・
Static DHCP Screen （Sec. 6.5.5.7 Use Static IP Address）
・
Routing Table Screen （Sec. 6.5.5.8 Set Routing Table）
・
WAN Selector Screen （Sec. 6.5.5.9 Coexistence with Other WAN）
・
PPPoE Screen （Sec. 6.5.5.10 Set PPPoE Server）
・
6-52
Advertisement
Table of Contents
