About Ip Address Input; About Dhcp; Initial Settings Of Ethernet Port - JRC JUE-501 Instruction Manual

About IP address input

1
＊ ）
IP address is configured with period-separated 4 strings of numbers.
Example) 192.168.128.100 or 10.20.30.0
Possible input range of IP Address:
10. 0.0.1 – 10.255.255.254
172.16.0.1 – 172.31.255.254
192.168.0.1 – 192.168.255.254
・Use of "all ones" or "all zeros" for the host field of the IP address is not supported.
・192.168.0.0/24 is used for EXT WAN and 192.168.60.0/24 is used for JRC LAN as a default. To set
these addresses to User LAN, change the network address of EXT WAN or JRC LAN first and set
the address to User LAN.

About DHCP

2
＊ ）
The range of IP address allocated by DHCP must not exceed network address defined
by parameter 1) and 2).
Port
User LAN
Ext WAN
NOTE
Table 6.5.3.3b Initial settings of Ethernet port
Parameter
IP Address
Subnet Mask
DHCP
DHCP Start Address
DHCP Count
IP Address
Subnet Mask
6-45
6. Web Menu System
Value
192.168.128.100
255.255.255.0
Enable
192.168.128.101
16
192.168.0.4
255.255.255.0