Table of Contents
Advertisement
5. How to use the telephone/FAX
5.2.3 Forwarding a call to the other terminals
We have two ways to pass a call to the terminal telephones which connected to BDE. One is Quick
Forwarding and another is Announced Forwarding.
* Quick Forwarding is unavailable when Multi-Voice Function is enabled. In that case, use
Announced Forwarding. About Multi-Voice Function, refer to Appendix J.
To forward a call to outside call automatically, refer to [6.5.2.3 Set Telephone Supplementary Service
(p6-40)] or [7.9.2.3 Suppl. setting (p7-50)].
Quick Forwarding
Quick Forwarding forwards an outside call to local terminals connected to BDE without any talk on
internal call.
To use Quick Forwarding, press
heard the beep tone, put the receiver back in its cradle.
Announced Forwarding
Announced Forwarding forwards an outside call to local terminals connected to BDE after a talk on
internal call.
To use Announced Forwarding, press 0
specified terminal will ring and you can talk with your crew on internal call. Put the receiver back in
its cradle after your internal call finished. Then your crew can talk with the outside caller.
Refer to table below for extension numbers of the JUE-501/JUE-251.
Device
Handset
TEL1~TEL6
All TEL ports and Handset
ISDN (Set PBX-MSN. Refer to p6-43.)
IPTEL1~IPTEL9
(Release software at end of 2013 will support)
All
Example) Transfer a call to TEL1 with Quick
Transfer a call to Handset with Announced Forwarding......... 0
To cancel forwarding mode, press
Forwarding mode will be cancelled and return to [on communication status]
* *
and the extension number during the communication. After you
*
and the extension number during the communication. The
Table 5.2.5 Allocated Extension Number
Forwarding......* *
* *+* *
*.
5-34
Allocated number
000
001~006
099
401
501~509
999
+001+[On-hook]
*
+000
Advertisement
Table of Contents
