Change The View Range Of The Packet Filter; Add New Packet Filter / Change Existing Packet Filter; Delete A Existing Packet Filter - JRC JUE-501 Instruction Manual

Change the view range of the packet filter

Step 1: Input the minimum ID number you want to view to the "Start" box.
Step 2: Input the maximum ID number you want to view to the "End" box.
Step 3: Click "Disp" button, and the list of ranges you inputted is displayed.

Add new packet filter / Change existing packet filter

Step 1: Input the filter rule to the text boxes.
Step 2: Click "Set" button in the same line.

Delete a existing packet filter

Step 1: Select "Disable" to the "Protocol No." and click "Set" button in the same line.
Setting of packet filters are applied immediately after the "Set" button is clicked.
6-63
6. Web Menu System