Change Pin Setting; Pin Changing Procedure; Chg Pin Menu (Changing Procedure Of Pin) - JRC JUE-501 Instruction Manual

7.9.6.2 Change PIN setting

In this menu, user can change the Personal Identification Number (PIN), which is necessary for SIM
card operation.
(To operate this menu, user should set PIN Input to [Enable] in [7.9.6.1 PIN Mode setting (p7-70)],
preliminarily.)

PIN changing procedure

1) Select [2 Change PIN] at [SIM Menu screen] and press OK, then SIM PIN input screen is displayed.
Input existed PIN (4-digit) and press
2) New PIN input screen is displayed. Input new PIN and press OK.
3) New PIN retype screen is displayed. Retype new PIN again and press OK.
About releasing method of PIN locking (it occurs when the input error exceeds three times), refer to
[Releasing PIN locking and new PIN setting procedure (p7-71)].
Top menu screen
9 Admin
0 Service
5 Auto Dcn.
6 SIM
1 PIN Mode
2 Change PIN
SIM Menu screen
Error
ＯＫ
When [PIN Input] is set
to [Disable]
5 Auto Dcn.
6 SIM
Returns to Admin Menu, even the
SIM PIN1 is incorrectly entered.
Fig.7.9.6.2 Chg PIN menu (changing procedure of PIN)
OK (entered figures are hidden by ****).
SIM PIN input screen
SIM PIN? 3
ＯＫ
****
Input
New PIN retype screen
Success
Retype PIN?
ＯＫ
ＯＫ
Error
7-71
7. Handset Menu System
MENU+ 9 +6+2）
PIN input limitation number
New PIN input screen
ＯＫ
New PIN?
****
ＯＫ
！
****
No limitation of input
error.