Table of Contents
Advertisement
4.3 Display Setting
The following sub menu is displayed with [MENU] / DISPLAY
DISPLAY
SCROLL SPEED
CLUTTER
INTERFERENCE
GAIN
RANGE
FWD DRAFT
AFT DRAFT
CURSOR
*The above-mentioned set content is
an initial value.
Selecting Image Scrolling Speed
The real time echo image scroll speed is selectable.
・Select SCROLL SPEED and press
Set content: SLOW/STD/FAST
・Select the speed by
Noise Suppression
◎The generation of this noise is decreased when a weak noise to the entire screen occurs and the screen
is hard to see.
・ Make CLUTTER a yellow display, press
content.
Set content: 0/1/2/3/4/5/6/7/8/9/10
・The ability to decrease the noise as the numerical value increases strengthens though "0" doesn't have
the ability to decrease.
・ Select the value by
Interference Rejection
◎ The interference noise by another ship displayed on the screen is reduced.
・ Make INTERFERENCE a yellow display, press
content.
Set content: OFF/IR1/IR2/IR3
・The ability to do the interference prevention processing strengthens while switching to "IR1 → IR2 →
IR3" though the interference prevention processing is not done in "OFF".
・ Select the content by
4. Operation 18
・ A present selection item is displayed by a yellow character.
・ Move a yellow character with
STD
・ When
4
IR1
item is selected, the item setting content is displayed.
AUTO
・ When the [ENT] key is pressed after the content is selected
AUTO
(setting), the selection (setting) is registered and it returns to
0.0
a left screen.
0.0
・ When returning to a left screen without registering, press
AUTO
or the [ENT] key. Then sub menu is popup as following.
and press the [ENT] key.
and press the [ENT] key.
and press the [ENT] key.
.
or the [ENT] key is pressed after a necessary
or the [CLR] key.
or the [ENT] key, and select it from the following, set
or the [ENT] key, and select it from the following, set
or
key.
Hide quick links:
Advertisement
Table of Contents
