Table of Contents
Advertisement
3)
Time／Byte
4)
Port
5)
Local IP
6)
Global IP
7)
APN
● Usage Information part
This block shows information of the logged in user. For details about user registration, refer to
User Registration [Sec. 6.5.4.1](p6-48) or Device Registration [Sec. 6.5.4.2](p6-50).
1)
2)
3)
Fig. 6.4.1d Dashboard – Usage Information part
Table 6.4.1d Contents of Dashboard - Usage Information
1)
User
2)
Level
3)
Remained
● Setting part
This block sets Heading value, Satellite selection method, or clears TX Alarm. The state of TX
Alarm can be confirmed by Dashboard-Information part.
* Although there is nothing wrong with JUE-501/JUE-251, selecting satellite makes some noise on
ADE.
Communication time
In Standard communications, data size is displayed.
In Standard communications, logs are saved every 10 M Byte.
Using port
1by1 NAT: Connecting local IP
IP Masquerade: Connecting local network address
Bridge: Connecting global IP
PPPoE: PPPoE bridge mode
Using global IP
Access Point Name
User name of the logged in user
Authority of the logged in user
Remaining connection time of the logged in user
6-13
6. Web Menu System
Advertisement
Table of Contents
