JRC JUE-501 Instruction Manual page 185

Input PIN
3)
Change Status
4)
Change PIN
Input Old PIN
5)
(Input SIM PUK)
Input New PIN
6)
Retype New PIN
7)
Change PIN
8)
Facility Lock
Change Status
Network
9)
Network Subset
10)
Service Provider
11)
Corporate
12)
SIM/USIM
13)
PIN Code input box
14)
Change Status
15)
Change PIN
Select Type
16)
Input Old PIN
17)
Input New PIN
18)
Retype New PIN
19)
Change PIN
20)
Secondary SIM
Secondary SIM
21)
Set
22)
Communications on FBB system might be disabled by changing SIM Configurations.
•
We strongly recommend you to change PIN codes for the security reason.
•
To change PIN Mode, PIN input is required.
Changes PIN Mode
Input 4-digits old PIN
(Input PUK when the PIN was locked.)
Input new PIN. The new PIN must be 4-digits number.
Retype new PIN for confirmation. Do not use copy and paste.
Register new PIN.
If the value of old PIN (or the PUK) was wrong, the SIM page is
reloaded with "PIN (or PUK) Remaining" subtracted.
Enable locks MCC (Mobile Country Code) and MNC (Mobile
Network Code).
Enable locks Network Subset Code.
Enable locks Service Provider Code.
Enable locks Corporate Code.
Enable locks particular one SIM/USIM Card.
There are no initial PIN Codes.
The number (from 8 to 16 digits) which is input for the first time shall
be applied as the facility PIN Code. If forgot the facility PIN Code,
changing the status and changing the PIN Code will be disabled.
Please do not forget the facility PIN Codes.
Changes status.
To change status, password is required. Input the password to the 13)
text box located on the left side of "Change Status" button.
Target to change PIN
Network/Network Subset/Service Provider/Corporate
Input from 8 to 16 digits old PIN
Input new PIN. The new PIN must be from 8 to 16 digits number.
Retype new PIN for confirmation. Do not use copy and paste.
Register new Facility PIN.
Use or non-use of Secondary SIM
System reboot is required to apply this setting.
Registers the setting.
NOTE
6-79
6. Web Menu System
Contents
Contents
Contents
Contents